Blog 9: How to Present The Results Of The Study Without Confusing Your Reader–Tables, words, and the “story” your data is trying to tell

Welcome back.

In the previous blogs, we have already covered several key steps: defining the outcome, selecting the exposures, understanding confounding, and learning why logistic regression is appropriate for a yes/no outcome.

Let us assume that data collection is now complete and that the statistical analysis has been performed. The next logical step is to communicate your findings to the world.

Presenting your study results is the central purpose of your research. After all, you conducted the study to communicate what you discovered. That is the most essential part of the entire process. By the time you reach this stage, you would have generated a substantial amount of data and performed various statistical analyses. In quantitative research, this usually translates into a large number of numerical outputs.

Remember that this blog series is focused on quantitative study designs. In qualitative studies, presenting findings is an entirely different exercise and follows a different structure.

Let me explain how you should present your study’s results.

Ideally, the planning for the Results section should begin much earlier—while you are preparing your statistical analysis plan. I repeatedly emphasize this in our blogs because one of the most common problems in investigator-initiated research (particularly studies conducted without external funding support) is that researchers keep the plan in their heads but never formally write it down.

Documenting the plan provides clarity. It helps you organize your thinking. It ensures that when the time comes to communicate your findings to the wider scientific community, you already know the structure you will follow.

Now, I will explain how to write the ‘results’ section using our working example:
“Determinants of Delayed Postoperative Mobilisation in Elderly Surgical Patients.”

Step 1: Start with a simple “who did we study?”

Before you show associations, you have to describe your study patients’ profile to your readers. Show your reader what your sample looks like. This information is best given in a table form – Table 1 (baseline characteristics).

What goes in Table 1

-Age
-Sex
-Type of surgery
-Anaesthesia type
-Key clinical factors measured early post-op (pain category, hypotension, presence of drains, etc.)
-Key functional factors (frailty marker, walking aid, etc.)
-Key system factors (weekend vs weekday, time to physio review, etc.)
-Outcome count: delayed vs not delayed

Let me present the results of the study here with dummy data, of course!

Assume the sample size for our study to be 180. This is how the table should look with all the relevant baseline information. For sample size of more than 100, give the percentages along the counts for categorical variables like sex, and for continuous variables like age, give the appropriate measures of central tendency and the measures of dispersion.

Table 1. Baseline Characteristics of Postoperative Patients

CharacteristicOverall (N = 180)
Age (years), mean ± SD69.4 ± 8.2
Sex 
Male104 (57.8%)
Type of Surgery 
Orthopaedic78 (43.3%)
Abdominal62 (34.4%)
Cardiac/Thoracic40 (22.3%)
Anaesthesia Type 
General128 (71.1%)
Regional / Spinal52 (28.9%)
Early Post-op Clinical Factors 
Moderate–Severe Pain (Day 1)72 (40.0%)
Post-op Hypotension34 (18.9%)
Surgical Drain Present96 (53.3%)
Functional Factors 
Frailty Marker Present66 (36.7%)
Use of Walking Aid Pre-op58 (32.2%)
System Factors 
Surgery on Weekend44 (24.4%)
Physio Review > 24 hours68 (37.8%)
Outcome 
Delayed Mobilisation74 (41.1%)
Not Delayed106 (58.9%)

Step 2: Show unadjusted findings  

Next, we compare patients who mobilised on time with those who mobilised late.

This is an unadjusted comparison — meaning we are simply observing raw patterns.

This table is best seen as a pattern-finding step.

A useful way to think about it is:

“These are clues — not verdicts.”

Because in real wards, patients rarely have just one risk factor (exposure) at a time. Pain, frailty, surgical complexity, hypotension, and staffing patterns often overlap.

In this step, you can show simple comparisons: “Delayed vs Not delayed” for each exposure.

Table 2. Unadjusted Associations with Delayed Mobilization

ExposureDelayed n (%) (n = 70)Not Delayed n (%) (n = 110)Unadjusted OR
Moderate–Severe Pain42 (60.0)33 (30.0)3.5
Post-op Hypotension21 (30.0)13 (11.8)3.2
Drain Present39 (55.7)44 (40.0)1.9
Frailty Marker38 (54.3)27 (24.5)3.6
Uses Walking Aid31 (44.3)24 (21.8)2.9
Weekend Surgery24 (34.3)18 (16.4)2.7
Physio Review > 24 hrs33 (47.1)31 (28.2)2.3

Table 2 shows unadjusted (crude) odds ratios, meaning each exposure is examined individually, without considering the influence of other variables. In Table 2, all exposures show positive association with delayed mobilization (note: all ORs are above 1). Although these estimates represent crude associations, presenting the unadjusted odds ratios provides an initial understanding of the relationship between each exposure and delayed mobilisation before adjustment for potential confounding factors in the multivariable logistic regression model.

A text could accompany the table to summarise the key findings. Read the sample text below. It summarizes and does not duplicate the data:

“Table 2 shows that all the examined exposures were more common in the delayed mobilisation group, with the strongest crude associations observed for moderate–severe pain, frailty markers, and postoperative hypotension.”

If you have forgotten what an OR is, you need to revisit blog 8 (https://www.rightresearchacademy.com/blog-8-understanding-association-confounding-and-what-the-results-really-mean/).

Step 3: Present adjusted results – the “main answer”

Your logistic regression output becomes your main findings table.

A clean regression table usually includes:

-Exposure
-Adjusted OR
-95% CI
-p-value (optional, but many include it)

Adjusted Logistic Regression Results (Core Evidence)

Table 3. Adjusted Odds of Delayed Mobilisation

ExposureAdjusted OR95% Confidence Intervalp-value
Moderate–Severe Pain2.31.2 – 4.50.01
Post-op Hypotension1.61.4 – 5.50.08
Drain Present1.40.8 – 2.30.19
Frailty Marker3.11.5 – 5.30.002
Uses Walking Aid1.91.1 – 3.60.08
Weekend surgery1.81.4 – 3.80.09
Physio review (>24 hours)1.11 – 4.30.2

Note in table 3 that logistic regression has changed the odds ratio that you saw in Table 2 for the same variables.

You can write the findings of table 3 like this:

After adjusting for relevant clinical, functional, and system factors, higher postoperative pain and frailty remained independently associated with delayed mobilisation. Patients who were frail had more than three times higher odds of delayed mobilisation.

Closing Thoughts

In this blog, we focused primarily on presenting results using a table because our working example did not require graphical presentation. In many studies, however, figures and graphics may help communicate patterns more effectively. Graphs such as bar charts, Kaplan–Meier curves, or forest plots can make complex relationships easier to understand at a glance.

At the same time, graphics should never be added simply for visual appeal. If a table already communicates the data clearly, a figure that merely repeats the same information adds little value. The goal of the Results section is clarity—not decoration.

A few practical do’s and don’ts can help keep your results section clear and reader-friendly.

Do

-Present findings in a logical sequence aligned with your study objectives
-Use tables to present detailed numerical information.
-Use the text to highlight the key patterns or most important findings.
-Refer to every table and figure in the text.

Don’t

-Repeat the same numbers in both the text and the table
-Overload the results section with too many tables or unnecessary graphics.
-Begin interpreting or explaining results extensively in this section—that belongs in the Discussion.
-Include results that are not directly related to your study objectives.

Remember this simple principle:
Tables show the numbers; the text explains the pattern.

Moment of Reflection

Take a moment to look at your own study results.

Ask yourself:

-Have I presented the numbers clearly using tables where needed?
-Does the accompanying text highlight the key findings without repeating the table?
-If I have used figures, do they genuinely help the reader understand the results better?

Small improvements in how results are presented can make a significant difference in how easily readers understand your work.

Coming Up in the Next Blog

Now that we have learned how to present results clearly, the next step is equally important—how to write the conclusion of your study.

Many researchers either repeat the results or make exaggerated claims in the conclusion. In the next blog, we will discuss how to write a concise, balanced, and meaningful conclusion that accurately reflects what your study has actually shown.

Gomathi Sundar is a research consultant and medical writer with over 25 years in healthcare. She specializes in study design, protocol writing, research reports, and manuscripts. She founded Right Research Academy to support postgraduates, novice researchers, and medical companies.
Gomathi Sundar
    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Blogs

    Other Blogs